Mimaki CJV30 Printer / Cutter

Mimaki CJV30 Printer Cutter

Probably the best Print and Cut machines in their class, the NEW Mimaki CJV30 range of machines lead the way for speed quality, performance and value for money.

SS21 SOLVENT INK – The CJV30 Series prints with fast drying solvent ink that does not peel when cut. Also run perfectly with ES3 ink.

HIGH SPEED FOR FAST DELIVERY – Capable of printing up to 17.3m2 (540x720dpi, 4 colours). The symmetrical ink cartridge arrangement enables detailed, high quality image generation even with bidirectional printing.

AUTOMATIC MEDIA CLAMP FUNCTION – The number of pinch rollers and their clamp pressures can be set from the RIP software, and the pinch roller pressure is adjusted automatically to suit the media. This enables unattended operation without manual intervention.

HIGH DETAILED VIVID IMAGES – CJV30 can print upto 1440dpi with three different sizes. Graining is eliminated, even in 4 colour mode.

ACCURATE CONTOUR CUTTING – Continuous cropmark detection recognises registration marks, even with a laminated print.

UNINTERRUPTED INK SUPPLY – When a cartridge runs out, another automatically begins to supply ink. Cartridges can be changed during printing and therefore can facilitate overnight printing.

  • Cutter is separate from printhead
  • Tension control on software
  • Solvent or Eco-Solvent choice
  • Take up standard
  • One RIP drives up to 4 printers
  • Automatic media clamp
  • Multiple crop mark detection
  • SS21 fast drying Ink
  • Uninterrupted ink supply
  • High speed Fast delivery
  • Comes with 8 x 440cc cartriges of ink

| Product top | Line-up | Specifications | Catalog PDF| Download |

Maximum print /
cut width
610 mm (24.0″)
1,020 mm (40.1″) 1,361 mm (53.5″) 1,610 mm (63.3″)
Print resolution 540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity 4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media Width 620 mm (24.4″) 1,030 mm (40.5″) 1,371 mm (53.9″) 1,620 mm (63.7″)
Thickness Less than 1.0 mm
Roll weight Less than 25 kg (55 lbs.)
Roll diameter Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1″)
Maximum cutting speed 30 cm: 11.8″/s (42 cm: 1 6.5″/s at the angle of 45)
Cutting force 10-350 g
Applicable tools Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting Cutting in Y direction by cutter on the head
Media heater Pre/print/post heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Command MRL-III , MGL-IIc2
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power AC100V~240V, Less than 1,380VA
Operation environments 20°C~35°C, 35~65%RH (No condensation)
(W x D x H)
1,524 x 739 x
(60″ x 29.1″ x
1,934 x 739 x
(76.1″ x 29.1″ x
2,289 x 739 x
(90.1″ x 29.1″ x
2,538 x 739 x
(99.9″ x 29.1″ x
Weight 110kg
(242 lbs.)
(286 lbs.)
(319 lbs.)
(352 lbs.)