HP Designjet 815 MFP

Call: 1-800-491-8785 for details

Introduction

The HP Designjet 815 MFP is the large-format multifunction solution from HP for color printing, scanning and copying.

This document details the physical, environmental, electrical, and media specifications of the HP Designjet 815 MFP as well as basic hardware and system requirements and special features.

Model numbers

HP Designjet 815 MFP - P/N Q1279A

Printer features

The following are features of the HP Designjet 815 MFP:

Embedded HP-GL/2 processor with drivers for AutoCAD and Windows
Embedded Adobe (R) PostScript (R) 3 (TM) RIP, with drivers for Macintosh and Windows
Print-job management through printer's 6-GB hard drive and 160 MB of RAM
Powerful network card: HP Jetdirect 10/100 BaseTX print server, as well as USB 1.1 and parallel ports
PDF, TIFF, JPEG, and CALS G4files also accepted
Max scan width of 42 inches
Optical resolution: 424 ppi (2,400 max)
Line accuracy: 0.15%
Max speed: B&W 3.0"/s, color 1.5"/s
Enlargement, reduction, paneling, nesting...
Close-loop color calibration
File browser, preview & launch (print list)
Fully featured copier/scanner/printer
Color and mono copies/scans/prints
Scan to CD (New!)
Job accounting for client billing
Job-collate copying (print list) for improved non-managed activity
Scan to file (to local 6.5-GB hard drive or over the network)

System requirements

The following are systems requirements for the HP Designjet 815 MFP:

NOTE: The 815 MFP is a complete unit that includes a Windows 2000 OS, however, the system requirements below are applicable if printing to the 815 MFP from another OS.

Microsoft (R) Windows 9x
Windows NT or 2000
Mac OS 8.1 or later

Recommended cables

The following cables are needed for use with the HP Designjet 815 MFP:

EEE compatible/Centronics Interface, 3.0 meters (9.84 feet) 25-pin male·
USB 5.0 m (16.40 feet) USB plug
Network cable (If connection to the network is desired)
2 FireWire cables (Shipped in the box)
Power cable (Shipped in the box)

Media specifications

The following table details media specifications for the printing portion of the HP Designjet 815 MFP.

Model	Sheet Sizes	Roll Sizes
Printer	Width: 21.08 cm to 106.68 cm (8.3 to 42 inches) Length: 21.08 to 189.73 (8.3 to 74.7 inches)	Width: 60.96 cm, 91.44 cm, and 106.68 cm (24, 36, and 42 inches) Length: up to 45.72 m (up to 150 feet)

Media handling information

Sheet feed
Roll feed
Automatic cutter

Margins

The following information details the margins for the HP Designjet 815 MFP:

Side margins, 5 mm
Leading edge margin, 17 mm
Trailing edge margin, 17 mm

Ink information

Supply Item	Ink Cartridge	Ink Cartridge	Printhead
HP no.10 Black	C4844A	X	X
HP no.82 Cyan Magenta Yellow	X	C4911A C4912A C4913A	X
HP no. 11 Black Cyan Magenta Yellow	X	X	C4810A C4811A C4812A C4813A

Memory information

HP Designjet 815 MFP

Standard: 160 MB RAM and 6 GB hard disk
Maximum: 160 MB RAM and 6 GB hard disk

Physical specifications

Attribute	Specification
Height	1.5 m (59 inches)
Width	2 m (79.5 inches)
Depth	0.84 m (33 inches)
Weight	180 kg (394 pounds)

Electrical specifications

Attribute	Specification
Power requirements	100 to 240 V AC +/- 10 percent auto-ranging; 50 to 60 Hz, 2 amps maximum
Power consumption	150 Watts maximum

Environmental specifications

Attribute	Specification
Operating temperature	18 to 32 degrees Celsius (C) (64 to 90 degrees Fahrenheit (F))
Storage temperature requirements	-25 to 55 degrees C (-24 to 131 degrees F)
Transportation temperature requirements	-40 to 70 degrees Celsius
Relative Humidity (RH)	15% to 80% RH 30% to 60% RH
Acoustic Noise	54 dB

General warranty

HP provides a one-year warranty with free, on-site, next business-day service, backed by HP support centers around the world. HP Support packs and Service Agreements allow you to extend your warranty to up to five years, and can provide around-the-clock service with a response time of within four hours, every day of the year (depending on the country).

Product certifications

Canada CSA C22.2
Europe 73/23/EEC EN60950
Mexico DGN
Norway NEMKO, EN 60950, EMKO TSE (74)DK207/94
US ITE, UL 1950
China CCIB certified
Czech Republic EZU IEC950 certified
Singapore PSB
Poland PCBC certified
Russia GOST certified